OJSC Electromachine-building plant “Firm SELMA”

Sales Department: phone: +38 (0652) 58-30-50, 58-30-52, 58-30-54;  E-mail:sbit@selma.crimea.ua

Automobile industry

Print

Electric welding equipment for manufacture and repair of passenger cars, trucks, buses and special motor machines

selma_application_1

We propose to you modern welding equipment which provides new stage of industrial progress on your plant and rising the quality of producing machines; and also essentially reduce primary costs in phase of preparation to welding.

We propose pay your attention to new unique machines – universal welding converters KSU-320 and KSU-500 which are the remote power source of low voltage. They allow make multi-station system of manual arc welding with coated electrodes due to connection to multi-station rectifiers. And also multi-station system of semiautomatic welding when completed with wire feeder. At this, welding stations of  manual arc welding and semiautomatic welding could work simultaneously.

 

We propose the series of semiautomatic machines which are ideal for welding in automobile industry

  • PDG-322, PDG-421 – compact and light, for wire cassette 5kg, allows make welding works on distance up to 40m.
  • PDG-312-5, PDGO-508S, PDGO-510 – for stationary works on wire cassette 15 kg;
  • PDGO-601, PDGO-602 – with increased capacity are designed for welding with steel and flux-cored wire of big diameter (steel – up to 2,2mm; flux-cored – up to 3,2mm); powerful engine of the drive ensures possibility of wire feeding from parcel and work with torch length 5m.

All feeders could be completed with any power source of our production VDG, VDU, VS types from 300A to 1000A because of universal supplying control board on feeders. For improving works on aluminium and their alloys we propose welding source VS-450 and also version with synergic control.

 

For welding of nonferrous metal:

Universal machines for argon arc welding UDGU-251 AC/DC, UDGU-351 AC/DC, UDGU-501 AC/DC allow weld practically all types of metals, provide non-contact ignition of the arc (due to oscillator), adjustment of smooth rising of the current, welding-up of craters and protection of welding pool after welding.

 

For cutting of metal sheets (including nonferrous):

  • For manual air-plasma cutting – machines UVPR-120, UVPR-200, UVPR-2001.
  • For completing the complexes of automatic cutting portal-type we propose UVPR-200 and UVPR-400.

Only electric supplying and compressed air are needed.

 

Compact cutting machine MPGA-21 is designed for automatic moving of:

  • Gas cutter for metal cutting;
  • Or plasma-torch for air-plasma cutting;
  • Or torch for MIG/MAG welding in atmosphere of shielding gases.

Mobile 2-coordinate machine MPGA-21 is light automatic complex for cutting or welding according given drafts and using CNC.

 

For repair works:

  • Compact, light, energy saving inverters VD-162, VD-200 for welding on direct current with coated electrode on nooks and height.
  • Transformers TDM-250, TDM-315, TDM-403, TDM-450, TDM-505 for welding at alternating current with coated electrode.
  • Rectifiers VD-306M1, VD-306C1, VD-306D, VD-506D for welding at direct current with coated electrode.
  • Semiautomatic machines PDG-252, PDG-251, PDG-351 for welding with electrode wire in atmosphere of protective gases.

Features of this equipment are simplicity of structure, reliability, durability, mobility, easy moving in operating conditions.

Firm SELMA provides warranty service and further service backup. All equipment of trade mark “SELMA” is produced in accordance with requirements of management system ISO-9001:2000, which is verified by TUV NORD CERT, and ecological management system ISO 14001:2006.

selma_5
2690

Electric welding equipment for construction and repair of oil and gas pipelines and oil reservoirs

Welding equipment of trade mark “SELMA” is used for construction and repair of oil and gas pipelines and oil reservoirs. Machines VD-306 DK and VD-506 DK were specially designed upon order of enterprises of oil and gas industry of Russia. They show an…
s_face
3445

The art of welding

Welder`s profession is associated in most cases with big clumsy iron sheets, reinforcement structures arousing in person hardly ever any positive emotions. And when being outside and seeing welding works we try to look aside as soon as possible off too bright…
P1010050
3101

Complex decisions on electric welding equipment for ship-building and ship-repair

The producer of welding equipment Firm “SELMA” (Ukraine) proposes to you comprehensive decisions for welding and cutting in shipbuilding and ship-repair, in particular: for manual arc welding with coated electrode on direct current. for MIG/MAG welding with…
stroika
2935

Electric welding equipment for civil and industrial building

We suggest you to familiarize yourself with commercial offer of OJSC Electromachine-Building Plant “Firm SELMA” (Simferopol) regarding the delivery of electric welding equipment for building sector. OJSC «Firm SELMA» is a leading enterprise in the field of…
vagon
3134

Electric welding equipment for manufacture and repair of railway transport

OJSC “Electromachine-building plant “Firm SELMA” is one of the biggest manufactures of electrowelding equipment for all types of arc welding. For production of rolling stock, parts and units intended for railway transport we propose electric welding equipment…
railway-3
2499

Electric welding equipment for renewal of depreciated parts of railway machines

OJSC “Electromachine-building plant “Firm SELMA” is one of the biggest manufactures of electrowelding equipment for all types of arc welding. For solving practice tasks on increasing the reliability and operating life of railway transport we propose electric…
selma_application_1
2597

Electric welding equipment for manufacture and repair of passenger cars, trucks, buses and special motor machines

We propose to you modern welding equipment which provides new stage of industrial progress on your plant and rising the quality of producing machines; and also essentially reduce primary costs in phase of preparation to welding. We propose pay your attention…

OJSC “Firm SELMA”

Ukraine, 95000, Simferopol city
32A, General Vasiliyev str.

E-mail: sales@selma.crimea.ua

Marketing Department:

Phone.: +38 (0652) 58-30-55
Fax: +38 (0652) 58-30-53
+38-050-360-56-42
+38-050-496-02-06
+38-050-360-64-25
E-mail: sbit@selma.crimea.ua
Mn-Fr:  7.30- 16.00  GMT+2

Sales Department:

Phone.: +38 (0652) 58-30-52, 58-30-54
Fax: +38 (0652) 58-30-53, 66-80-81
+38-050-393-12-83
+38-050-397-78-85
+38-050-360-56-41
+38-050-360-47-45
+38-050-360-80-13
E-mail: sbit@selma.crimea.ua

Mn-Fr:  7.30- 16.00  GMT+2